mr water well drilling cost calculator

2023-06-28

Investing in a water well requires careful consideration and can be quite costly. When deciding to drill a well, variables such as the type of well, the depth, the location of the well, the water table, the subterranean soil conditions, and rock formations must all be assessed. Further, the type of drilling rig required for the process may bring in additional costs.

In the US, the standard charge for drilling a water well comes to $5,500, with an average depth of 100 feet – amounting to $55 per foot. Though the cost of drilling can vary drastically due to the location; the cost of setting up a water well in a rural area could be as little as $3,000 while in an urban setting it could be as much as $10,000.

When it comes to digging a water well, the type of well determines the cost. Unsurprisingly, a dug well is the most budget-friendly with an average cost of just $1,500. In contrast, with an average price of around $5,500, drilling a drilled well is substantially pricier. However, that higher price tag also suggests that a drilled well is far less likely to experience any geological or hydrological problems.

Depending on the type of drilling rig used, the cost of digging a water well can vary greatly. A truck-mounted rig is the most reasonably priced, averaging at $3,000, while a track-mounted rig is slightly pricier with an average cost of $5,500. The most costly option to consider is a drill ship, which typically boasts an exorbitant price tag of $10,000.

The expense for drilling a water well is dependent on its depth; the more profound the well, the higher the price. Drilling a well that is 100 feet deep can cost an average of $5,500, while one at 200 feet could be around $10,000. Digging a water well that is 300 feet deep can cost a staggering $15,000.

The amount of money it takes to drill a water well can vary significantly relying on the height of the local water table. Generally speaking, if the water table is low, the cost of drilling a well will be more economical at an average of $5,500. On the other hand, if the water table is high, it typically costs about $10,000 to complete the drilling project.

Variations in soil composition have a significant impact on the overall cost of installing a water well. Generally, the softer, grainier texture of sandy earth results in a more expensive drill, with an average cost of $10,000. Conversely, more solid clayground paves the way for a cheaper drill, coming in around the $5,500 mark.

When it comes to drilling a water well, the hardness of the rock underfoot can really affect the price tag. With hard rock, the going rate for a well is close to ten grand; but if you have softer stone below you, don’t expect to pay such an exorbitant sum — it may only be about five-and-a-half thousand instead.